2018-20 Stage II Jeep Wrangler JL 2/4 Door & 2020-21 Gladiator Supercharger Competition Kit (Not For Sale or Use in CA.)
2018-20 Stage II Jeep Wrangler JL 2/4 Door & 2020-21 Gladiator Supercharger Competition Kit (Not For Sale or Use in CA.)

2018-20 Stage II Jeep Wrangler JL 2/4 Door & 2020-21 Gladiator Supercharger Competition Kit (Not For Sale or Use in CA.)

review
0
0
5
Your Price: $6,395.00
Part Number:930502T
To increase the performance of your Jeep even more, go with our Stage II kit which provides 450HP* and370 lb. ft. of torque! This kit is highly recommended if you are planning on installing larger wheels, tires, and more aggressive gears. Includes 3 year/36,000-mile limited parts warranty (See warranty information on page 29).

The Stage II kit includes the following components shown in the photo below with upgraded Higher Flow Injectors, Upgraded ECM (Engine) Calibration**
and New TCM (Transmission) Calibration***

NOTES: * 450HP is achieved with optimum weather conditions using 93 octane E10 gasoline and a high flow dual exhaust system. We recommend using MBRP high flow dual exhaust shown in photo below.

** Engine calibration is included with the complete kit (PN #93050T) and is provided via email in HP Tuners format if ordered as an upgrade kit (PN #922200T). 2 HPTuners tuning credits are required to install base calibration on tuner kit. 93 octane fuel is required. If 93 octane fuel is not available,
an optional 91 octane calibration is available and must be specified at time of order. An HPTuners Gateway Bypass Cable is required to install or modify the calibration provided.

*** Our transmission calibration is provided via email in HP Tuners format. An HPTuners Gateway Bypass Cable is required to install or modify the transmission calibration provided. A readout of the stock TCM calibration is required from the vehicle and emailed to SVE. The modified TCM
calibration will be emailed back which can then be installed in the TCM. 4 HP Tuners tuning credits are required to install the new TCM calibration. We support Stage II TCM calibrations for one of the following 3 combinations of tire size and gear ratio: 33” tires with 4.56 gears, 37” tires with 4.56 gears, or 37” tires with 5.13 gears. The speedometer calibration modifications required when changing tire size and/or gears must be made by the installer and can
be done with HP Tuners software and does not require any other aftermarket accessory to change.

BASE CALIBRATION INCLUDED IN HPTUNERS FORMAT VIA EMAIL.
(NOT AVAILABLE FOR SALE OR USE IN CA.)